欧美亂伦ⅹⅹx中字在线,欧美老熟妇xb水多毛多 ,四虎成人精品一区二区免费网站,被吊起来张开腿供人玩弄

| Home |Epoxy Resin|Polyurethane|Silicone|Hardener|Accelerant|Thinner|Flame Retardant|Filler|Coupling Agents|Company URL|Contact|

H-113 Hardener of Epoxy Resin

　

Description: Epoxy Hardener H-113 is modified aromatic amine additives with the characteristics of aromatic amine, room temperature curing and low viscosity. Its curing surface is glossy, with high mechanic strength, easy operation and low multiple costs

Features:

Appearance:	brown liquid
Viscosity: 40℃                 mpa·s	25-35
Active Hydrogen equivalent:     Ahew	95
Pot life: 25℃①	45min
Hardness after curing: Shore- D①	>80
Curing rate:                 min/60℃	20-25

①Mix ratio:  Epon828:H-113=100:50

①Cure condition:  24hrs at room temperature.

Application:

1.Combined with liquid epoxy resin, suitable for electronic unit potting at R.T.

2.Combined with liquid or solvent-containing epoxy resin, suitable for middle and bottom floor coating.

Packing：

Packed in 200Kg/steel drum or 25Kg/plastic pail.

Note:

1. Avoid contact with skin an eyes. If contact with skin, wash immediately with soap and plenty of water. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.

2. The information above is just for customers’ reference. You should test before use. Would you have any further problems in application, please do not hesitate to contact our Sales Department immediately.

　

Back