|
1. Description
Chemical name: Phenyl glycidyl ether, containing phene
ring and ether key and epoxy group, compared with 501
dilunet, which can eliminate the bad effect from heat
when curing, so its advantage is good heat-resistance,
and good corrosion-resistance. Molecular formula：C9H10O2，
molecular weight：150，Structural
Formula: C6H5OCH2(CHCH2)O.
CAS No.: 122-60-1
Physical and chemical character: Colorless transparent
liquid, melting point: 3.5℃,boiling point:
242.5℃,relative density: 1.1109(21.2℃),refraction rate:
1.5307(21.2℃),flash point>110℃ immiscible in
water but it can be vaporized by water vapour, easy
miscible in aether and phene.
2. Technical Data Sheet（TDS）
|
Color, APHA
|
≤150
|
|
Viscosity, mPas (25℃)
|
5～10
|
|
Epoxide equivalent, g/eq
|
≤182
|
|
Epoxy value, eq/100g
|
≥0.55
|
|
Hydrolyzable chloride, eq/100g
|
≤0.02
|
|
Inorganic chlorine, eq/100g
|
≤0.005
|
3. Application
- D-690 can be discretionarily combined with epoxy resin
in proportion because of its low viscosity (only about
0.007Pa·s).
- To be used as Epoxy resin active diluent, modified m-phenylenediamine
curing agent material, and in non-solvent unticorrosion
coating, winding-forming.
Dosage: In general, D-690 should be 10-15% of Epoxy Resin in
weight, D-690 contains epoxy group which can neutralize
curing agent, so it is necessary to add the quantity of
curing agent in course of using.
4. Packing
- Packed in 25 kg/barrel or 200 kg/barrel, or 1000kgs/IBC
container
- Storage and transportation must conform to basic
requirements of normal chemicals.
- Store in a cool, dry and well ventilated area. Keep away
from ignition sources, heat and flame and sunlight.
- It is necessary to maintain insulated (tightly seal)
after use, in order to avoid negative influence arousing
from moisture absorption.
|
